Bluetooth headset hat Operating Instructions hat
Rita
www.jaskeyworld.com
2014-11-12 19:54:40
Dear Customer, Hello!
Please use this device (Bluetooth headset hat) Carefully read the instructions before in order to properly operate Bluetooth headset hat.
A Notes
▲ Keep at room temperature environment and the use of this product
▲ Do not expose this product to rain or wet conditions Bluetooth headset hat
▲ Do not throwing to avoid damage to the product due to fall
▲ Do not disassemble, repair or modify the product Bluetooth headset hat
Second, the product parameters
1. Bluetooth version: V3.0 + EDR
2. Frequency range: 2.4026GHz-2.480GHz
4. Transmission distance: 10M (transmission distance due to environmental factors and cell phones Bluetooth headset hat Differ)
5.MIC Distance: ≤1 m
6. Lithium Battery: 3.7V / 120mA
7. Charging time: 2.5 hours
8. Standby time: about 60 hours
9. The continuous working time: about 6 hours
10. Bluetooth headset hat name: Magic Hat
Three features Introduction
1. Bluetooth 3.0 + EDR technology to support the market most Bluetooth-enabled devices.
2. Using a hat knit material, stylish, warm and practical, allowing you to listen to music at home, on the phone is no longer cold.
3. Built-in MIC, can be used for hands-free phone system, easy to make or receive calls.
4. Built-in high-capacity lithium battery, Bluetooth headset hat multiple circuit protection, and through the USB port can be recharged, Bluetooth headset hat long standby and talk time.
5. Support Bluetooth headset hat battery level is displayed on the Apple phone.
Fourth, buttons and interface description
1 "-" keys: volume down / previous track
. 2 "=" & gt; ": power on / off / play / pause / answer / hang up / redial
3 "+": Volume up / down song
Five common functions operating instructions
Charging the headset
Via standard USB charging cable, one end connected to the computer, connect one end micro interface Bluetooth headset, red light, indicating a positive state of charge, the red light goes off after full.
2. Turn on the receiver
In the off state, often by "=" & gt; key "3 seconds, Bluetooth headset hat slow flashing blue lights have been switched on.
3. Turn off the receiver
In working condition, often by "" = & gt; key "three seconds, the light goes out, has been shut down
4. Play the wireless connection Bluetooth headset
1) paired with a connection
Often by "=" & gt; key "5 seconds, Bluetooth headset hat the indicator light flashes alternately in red and blue, then you search for a new device on your phone or computer, search the name" Magic Hat
"After the initial pairing will need to enter a password, enter 0000 to confirm (some devices do not need to enter a password.) After a successful pairing connection indicator turns blue lights flashing slowly Bluetooth headset hat.
2) Automatic back even
After the success of mobile phones or computers and other devices connected to the Bluetooth headset hat, in case none of the parties unpair can automatically connect the next re-use.
3) Automatic Search
When the phone or computer and other equipment used successfully paired with a Bluetooth headset hat, since some cases turned off the computer and other Bluetooth-enabled cell phone or device, the Bluetooth headset will immediately enter the new search condition.
4) Play / Pause
After successful pairing, press "=" & gt; key ", music pause, then a short press" = "& gt; key" resume music playback.
5) a
After successful pairing, press "- key" to enter the song.
6) under a
After successful pairing, press "+ key" to the next song.
7) the volume reduction
After successful pairing, press Bluetooth headset hat "- key" to the volume gradually becomes smaller and accompanied by "boom" "boom" sound ends.
7) The volume increase
After successful pairing, press "+ key" to the volume gradually become larger and accompanied by "boom" "boom" sound End
Please use this device (Bluetooth headset hat) Carefully read the instructions before in order to properly operate Bluetooth headset hat.
A Notes
▲ Keep at room temperature environment and the use of this product
▲ Do not expose this product to rain or wet conditions Bluetooth headset hat
▲ Do not throwing to avoid damage to the product due to fall
▲ Do not disassemble, repair or modify the product Bluetooth headset hat
Second, the product parameters
1. Bluetooth version: V3.0 + EDR
2. Frequency range: 2.4026GHz-2.480GHz
4. Transmission distance: 10M (transmission distance due to environmental factors and cell phones Bluetooth headset hat Differ)
5.MIC Distance: ≤1 m
6. Lithium Battery: 3.7V / 120mA
7. Charging time: 2.5 hours
8. Standby time: about 60 hours
9. The continuous working time: about 6 hours
10. Bluetooth headset hat name: Magic Hat
Three features Introduction
1. Bluetooth 3.0 + EDR technology to support the market most Bluetooth-enabled devices.
2. Using a hat knit material, stylish, warm and practical, allowing you to listen to music at home, on the phone is no longer cold.
3. Built-in MIC, can be used for hands-free phone system, easy to make or receive calls.
4. Built-in high-capacity lithium battery, Bluetooth headset hat multiple circuit protection, and through the USB port can be recharged, Bluetooth headset hat long standby and talk time.
5. Support Bluetooth headset hat battery level is displayed on the Apple phone.
Fourth, buttons and interface description
1 "-" keys: volume down / previous track
. 2 "=" & gt; ": power on / off / play / pause / answer / hang up / redial
3 "+": Volume up / down song
Five common functions operating instructions
Charging the headset
Via standard USB charging cable, one end connected to the computer, connect one end micro interface Bluetooth headset, red light, indicating a positive state of charge, the red light goes off after full.
2. Turn on the receiver
In the off state, often by "=" & gt; key "3 seconds, Bluetooth headset hat slow flashing blue lights have been switched on.
3. Turn off the receiver
In working condition, often by "" = & gt; key "three seconds, the light goes out, has been shut down
4. Play the wireless connection Bluetooth headset
1) paired with a connection
Often by "=" & gt; key "5 seconds, Bluetooth headset hat the indicator light flashes alternately in red and blue, then you search for a new device on your phone or computer, search the name" Magic Hat
"After the initial pairing will need to enter a password, enter 0000 to confirm (some devices do not need to enter a password.) After a successful pairing connection indicator turns blue lights flashing slowly Bluetooth headset hat.
2) Automatic back even
After the success of mobile phones or computers and other devices connected to the Bluetooth headset hat, in case none of the parties unpair can automatically connect the next re-use.
3) Automatic Search
When the phone or computer and other equipment used successfully paired with a Bluetooth headset hat, since some cases turned off the computer and other Bluetooth-enabled cell phone or device, the Bluetooth headset will immediately enter the new search condition.
4) Play / Pause
After successful pairing, press "=" & gt; key ", music pause, then a short press" = "& gt; key" resume music playback.
5) a
After successful pairing, press "- key" to enter the song.
6) under a
After successful pairing, press "+ key" to the next song.
7) the volume reduction
After successful pairing, press Bluetooth headset hat "- key" to the volume gradually becomes smaller and accompanied by "boom" "boom" sound ends.
7) The volume increase
After successful pairing, press "+ key" to the volume gradually become larger and accompanied by "boom" "boom" sound End
